|
|
| Hardware Specifications | ||||||
| CPU | 32-bit MIPS 24KEc Industrial Grade Chipset, Core Frequency 575/580MHz | |||||
| System Memory | 128MB / Optional 256MB DDR2 RAM | |||||
| Flash | 16MB SPI Flash (Optional 64MB Max) | |||||
| Wi-Fi | 2.4GHz IEEE 802.11n MIMO up to 300Mbps Detachable High Gain Wi-Fi Antennas | |||||
| Interfaces | WAN | 1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection | ||||
LAN | 1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection | |||||
| Terminal Block | 2.54mm Standard Phoenix Style terminal Block Connector, Support RS232/RS485 Serial Connection. Include DC powerInput Pin DI, DO | |||||
| SIM | 1 x Standard Drawer-type SIM Card Holder (2FF)Support 1.8V/3V SIM/UIM card, Built-in 15KV ESDProtection Support Built-in SIM Card(Option) | |||||
| Power | Standard DC Power Input Jack, Reverse-VoltageProtection and Surge Protection | |||||
| Reset | 1 x PinHole Reset Button | |||||
| WPS | 1 x WPS Button | |||||
| Antenna | 2 x Standard SMA-Female Antenna Connector, 50 ohm(Cellular) 2 x Standard RP-SMA-Male Antenna Connector, 50 ohm(WiFi) | |||||
| Indicators | PWR LED Indicator x 1 SYS LED Indicator x 1 Wi-Fi LED Indicator x 1 WAN LED Indicator x 1 LAN LED Indicator x 1 VPN LED Indicator x 1 NET LED Indicator x 1 SIM Card Status LED Indicator x 1 Cellular Signal Strength LED Indicator x 3 | |||||
| Phoenix Terminal | Specifications: 7 x 2.54mm V+ (DC Input) V- (DC Input) DI (default 12V high-level ) DO (0/5V~24V) GND (RS232) TXD/A+ (The default protocol is RS485) RXD/B- (The default protocol is RS485) | |||||
| Hardware Watchdog | Included Hardware Watchdog, Support Device Operation Self-CheckTechnology, Auto Recovery from Device Failure | |||||
| Power Input | Power Type 12VDC/1A | |||||
| Power Range 9V ~ 36VDC Wide Power Input | ||||||
| Power Consumption <450mA (12V), Average 170mA@12V | ||||||
| Dimensions | 95mm x 106mm x 28mm (Excluding Antenna and Mounting Sets) | |||||
| Weight | Approx. 280g (Excluding Antenna and Mounting Sets) | |||||
| Environment | Operating Temperature: -35°C to 75°C Storage Temperature: -40°C to 85°C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing | |||||
Product - ComIn I2100 Industrial Grade 4G Wireless Router Product Specifications.pdf | 689.65KB | 다운로드 |
邮箱验证