|
|
| Hardware Specifications | ||||||
| CPU | 32bit MIPS Industrial Grade Network Processor | |||||
| System Memory | 128MB DDR2 RAM (Optional 256MB Max) | |||||
| Flash | 16MB SPI Flash (Optional 32MB Max) | |||||
| Wi-Fi | 2.4GHz IEEE 802.11n MIMO | |||||
| Interfaces | WAN | 1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection | ||||
LAN | 4 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection | |||||
| Terminal Block | 2.54mm Standard Industrial Terminal Block. SupportSerial RS232/RS485, DC Power Input, GPIO | |||||
| SIM | 1 x Drawer-Type SIM Card Holder(2FF)Support Standard 1.8V/3V UIM/SIM Card, 15KV ESDProtection, Support Built-in SIM Card (eSIM) | |||||
| Power | Standard DC Power Input Jack, Reverse-VoltageProtection and Surge Protection | |||||
| Reset | 1 x Factory Reset Button | |||||
| Antenna | 2 x Standard SMA-Female Antenna Connector, 50 ohm(Cellular) 2 x Standard RP-SMA-Male Antenna Connector, 50 ohm(Wi-Fi) | |||||
| Indicators | PWR LED Indicator x 1 SYS LED Indicator x 1 Wi-Fi LED Indicator x 1 NET Status LED Indicator x 1 CELLULAR Strength LED Indicator x 3 | |||||
| Phoenix Terminal | Specifications: 7 x 2.54mm VCC+ (DC Input) GND (DC Input) GPIO1 (GPIO Input 0/3.3V) GPIO2 (GPIO Output 0/3.3V) GND (RS232) RXD/B- (The default protocol is RS485) TXD/A+ (The default protocol is RS485) | |||||
| Hardware Watchdog | Built-in Hardware Watchdog, Auto Self-Check, Auto Failure Recovery | |||||
| Power Input | Power Type 12VDC/1A | |||||
| Power Range 9V ~ 36VDC Wide Power Input | ||||||
| Power Consumption <450mA (12V), Average 210mA@12V | ||||||
| Dimensions | 130mm x 135mm x 26mm (Exclude Antenna and Mounting Sets) | |||||
| Weight | Approx. 445g | |||||
| Environment | Operating Temperature: -35°C to 75°C Storage Temperature: -40°C to 85°C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing | |||||
Product - ComIn I2200 Industrial Grade 4G Wireless Router Specifications.pdf | 719.65KB | ダウンロード |
邮箱验证