|
|
| Hardware Specifications | |
| CPU | 32-bit MIPS dual core industrial grade processor |
| Flash | 16MB SPI Flash (Optional 64MB Max) |
| System Memory | 128 MB (Optional 256MB Max) |
| Wi-Fi | 2.4GHz IEEE 802.11n MIMO up to 300Mbps Detachable High Gain Wi-Fi Antennas |
| Installation | Hanging-Ear or Din-Rail Installation |
| LED Indicators | PWR LED Indicator x 1 SYS LED Indicator x 1 WIFI LED Indicator x 1 NET LED Indicator x 1 Cellular Signal Strength LED Indicator x 3 |
| Interfaces | WAN: 1 x 10 / 100Mbps FE RJ45 Port, auto MDI / X, with 1.5KV magnetic isolation protection LAN: 4 x 10 / 100Mbps FE RJ45 Port, auto MDI / X, with 1.5KV magnetic isolation protection Terminal Block: 2.54mm Standard Phoenix Style terminal Block Connector, Support RS232 / RS485 Serial Connection. Include DC power Input Pin DI, DO SIM: 1 x Standard Drawer-type SIM Card Holder (2FF) Support 1.8V / 3V SIM / UIM card, Built-in 15KV ESD Protection Support Built-in SIM Card(Option) Power: Standard DC Power Input Jack, Reverse-Voltage Protection And Surge Protection Reset: 1 x PinHole Reset Button Antenna: 2 x Standard SMA-Female Antenna Connector, 50 ohm (Cellular) 2 x Standard RP-SMA-Male Antenna Connector, 50 ohm (Wi-Fi) |
| Phoenix Terminal | Specifications: 7 x 2.54mm VCC+ (DC Input) GND (DC Input) GPIO1 (GPIO Input 0 / 3.3V) GPIO2 (GPIO Output 0 / 3.3V) GND (RS232) RXD / B- (The default protocol is RS485) TXD / A+ (The default protocol is RS485) |
| Power Input | Power Type: 12V DC / 1A Power Range: 9~36VDC Wide Power Input Power Consumption: <450mA (12V), Average 210mA@12V |
| Dimension | 130mm x 135mm x 26mm |
| Weight | 445g |
| Operating Temperature | -35°C to +75°C |
| Storage Temperature | -40°C to +85°C |
| Operating Humidity | 10% - 95% (non-condensing) |
| Firmware | Linux SDK |
Product - ComIn I2205 Industrial Grade 5G Wireless Router.pdf | 1.08MB | Download |
邮箱验证