I2150 - 深圳星恒讯一站式联网解决方案

ComIn I2150 adopts a stable performance industrial grade 32-bit MIPS processor, with enterprise level data communication processing capabilities, 128MB system memory, Wi Fi support for 2.5GHz 802.11n wireless protocol, and provides a maximum speed of 300Mbps.

Product Details

Technical Parameter

Data Download

5G Industrial Router

5G Cellular Network | Industrial Grade Design | 300Mbps Wireless Speed

5G High-speed Internet Experience

Supports NSA and SA 5G network standards, with high peak, high rate, and low latency, providing users with a seamless experience of the new era network

Support Two Types of Serial Port Formats

External serial port device, supporting RS232/RS485 two types of serial port forms to achieve bidirectional data transmission

Intelligent Software and Hardware Watchdog

The product supports hardware and software watchdog, which can achieve automatic fault recovery and double guarantee high reliability of the equipment

Industrial Grade Design

Industrial grade software and hardware watchdog design, ensuring fault free and reliable operation in power stations, transportation, and industrial control environments

Applicable to Multiple Scenarios

Widely used in the M2M industry in the IoT industry chain, such as smart grids, in vehicle Wi-Fi, smart oil fields, supply chain automation, industrial automation, and other fields

ComCloud Management

Effectively carry out remote management of multiple devices, timely grasp the operating status of devices, and know any device failures in a timely manner, troubleshoot and maintain them in a timely manner

图文展示(1)

Hardware Specifications
CPU	32-bit MIPS 24KEc Industrial Grade Chipset, Core Frequency 575 / 580MHz
Flash	16MB SPI Flash (Optional 64MB Max)
RAM	128MB / Optional 256MB DDR2 RAM
Wi-Fi Standards	2.4GHz IEEE 802.11n MIMO up to 300Mbps Detachable High Gain Wi-Fi Antennas
Installation	Hanging-Ear or Din-Rail Installation
LED Indicators	PWR LED Indicator x 1 SYS LED Indicator x 1 Wi-Fi LED Indicator x 1 WAN LED Indicator x 1 LAN LED Indicator x 1 VPN LED Indicator x 1 NET LED Indicator x 1 SIM Card Status LED Indicator x 1 Cellular Signal Strength LED Indicator x 3
Interfaces	WAN: 1 x 10 / 100Mbps FE RJ45 Port, auto MDI / X, with 1.5KV magnetic isolation protection LAN: 1 x 10 / 100Mbps FE RJ45 Port, auto MDI / X, with 1.5KV magnetic isolation protection Terminal Block: 2.54mm Standard Phoenix Style terminal Block Connector, Support RS232 / RS485 Serial Connection. Include DC power Input Pin DI, DO SIM: 1 x Standard Drawer-type SIM Card Holder (2FF) Support 1.8V / 3V SIM / UIM card, Built-in 15KV ESD Protection Support Built-in SIM Card(Option) Power: Standard DC Power Input Jack, Reverse-Voltage Protection And Surge Protection Reset: 1 x PinHole Reset Button WPS: 1 x WPS Button Antenna: 2 x Standard SMA-Female Antenna Connector, 50 ohm (Cellular) 2 x Standard RP-SMA-Male Antenna Connector, 50 ohm (Wi-Fi)
Phoenix Terminal	Specifications: 7 x 2.54mm V+ (DC Input) V- (DC Input) DI (GPIO Input 0 / 3.3V) DO (GPIO Output 0 / 3.3V) GND (RS232) TXD / A+ (The default protocol is RS485) RXD / B- (The default protocol is RS485)
Power Input	Power Type: 12VDC / 1A Power Range: 9~36VDC Wide Power Input Power Consumption: <450mA (12V), Average 170mA@12V
Dimension	95mm x 106mm x 28mm
Weight	280g
Operating Temperature	-30°C to +75°C
Storage Temperature	-40°C to +85°C
Operating Humidity	10% - 95% (non-condensing)
Firmware	Linux SDK or OpenWRT