4G / 5G Industrial Router / Router Modules / Industrial Switch Source Manufacturer

English

中文

English

(1)(1)(1)(1)

ComIn I2120

Industrial Grade 4G Wireless Router

DC 9V~36V Wide Power Input

DIN-rail Installation

Dual SIM Backup Functionality

The ComIn I2120 also provides an Ethernet WAN RJ45 network port, an Ethernet LAN RJ45 network port, a set of industrial Phoenix terminal blocks (serial function and power supply function), a drawer type SIM/UIM card slot.ComIn I2120 can simultaneously connect serial ports, Ethernet ports, and Wi Fi for direct transmission.

Industrial Grade 4G Wireless Router

4G LTE Cat4 I Support Dual SIM Backup Functionality

4G Network

4G high-speed interconnection provides devices with high-speed and reliable wireless connectivity 24/7

300Mbps Wireless Speed

300Mbps high-speed transmission significantly improves data exchange efficiency and provides strong support for intelligent decision-making

Industrial-grade Design

Industrial grade metal casing, adaptable to extreme environments, resistant to vibration and impact, reliable operation

Dual SIM Card Backup Function

Built in dual SIM card slots, intelligent master-slave switching; Greatly ensuring that equipment is online 24/7 and the network is never interrupted

Dual Watchdog Design

Included Hardware Watchdog, Support Device Operation Self- Check Technology, Auto Recovery from Device Failure

Cloud Platform Management

Effective remote management of multiple devices and timely monitoring of device operation status

Scenario Application

Widely used in the M2M industry in the loT industry chain, such as intelligent transportation, industrial automation, and other fields

(1)(1)(1)(1)(1)(1)(1)(1)(1)(1)

Hardware Specifications
CPU	32-bit MIPS 24KEc Industrial Grade Chipset, Core Frequency 575/580MHz
System Memory	128MB / Optional 256MB Max
Flash	16MB SPI Flash (Optional 64MB Max)
WiFi	2.4GHz IEEE 802.11n MIMO up to 300Mbps Detachable High Gain WiFi Antennas
Interfaces	WAN	1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection
	LAN	1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection
	Terminal Block	2.54mm Standard Phoenix Style terminal Block Connector, Support RS232/RS485 Serial Connection. Include DC powerInput Pin DI, DO
	SIM	Dual Nano SIM Card Tray (4FF SIM Card) Support 1.8V/3V SIM/UIM card, Built-in 15KV ESD Protection Support Built-in ESIM Card(Option)
	Power	Standard DC Power Input Jack, Reverse-VoltageProtection and Surge Protection
	Reset	1 x PinHole Reset Button
	WPS	1 x WPS Button
	Antenna	2 x Standard SMA-Female Antenna Connector, 50 ohm(Cellular) 2 x Standard RP-SMA-Male Antenna Connector, 50 ohm(WiFi)
Indicators	PWR LED Indicator x 1 SYS LED Indicator x 1 WiFi LED Indicator x 1 WAN LED Indicator x 1 LAN LED Indicator x 1 VPN LED Indicator x 1 NET LED Indicator x 1 SIM Card Status LED Indicator x 1 Cellular Signal Strength LED Indicator x 3
Phoenix Terminal	Specifications: 5 x 2.54mm GPIO2(GPIO Input 0/3.3V) GPIO1 (GPIO Output 0/3.3V) GND (RS232) TXD/A+ (The default protocol is RS485) RXD/B- (The default protocol is RS485) Specifications: 2 x 2.54mm VIN (DC Input) GND(DC Input)
Hardware Watchdog	Included Hardware Watchdog, Support Device Operation Self-CheckTechnology, Auto Recovery from Device Failure
Power Input	Power Type 12VDC/1A
	Power Range 9V ~ 36VDC Wide Power Input
	Power Consumption <450mA (12V), Average 170mA@12V
Dimensions	95mm x 98mm x 28mm (Excluding Antenna and Mounting Sets)
Weight	Approx. 280g (Excluding Antenna and Mounting Sets)
Environment	Operating Temperature: -35°C to 75°C Storage Temperature: -40°C to 85°C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing