|
|








| Hardware Specifications | ||||||||||||
| CPU | MT7621A + MT7603EN + MT7613B | |||||||||||
| Memory | DDR2 256MB (Optional 512MB) | |||||||||||
| Flash | 16MB (Optional 64MB) | |||||||||||
| WiFi Standard | Dual Band WiFi, IEEE 802.11a/b/g/n/ac | |||||||||||
| Interfaces | WAN | 1 x 10/100/1000Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection | ||||||||||
LAN | 4 x 10/100/1000Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection | |||||||||||
USB | 1 x USB 2.0 Port | |||||||||||
| SIM Card | 2 x Push-Push SIM card Slot (2FF) | |||||||||||
| Power | 1 x Standard DC Connector, Built-in Power Reverse Protection | |||||||||||
| Reset | 1 x Pin-hole Reset Button | |||||||||||
| TF Storage | 1 x TF Card Slot for Storage | |||||||||||
| Antenna | 6 x standard SMA antenna interfaces, characteristic impedance 50ohms | |||||||||||
| Indicators Light | 2 x 4G Antenna 2 x 2.4GHz Wi-Fi Antenna 2 x 5GHz Wi-Fi Antenna 1 x GPS Antenna (Optional) | |||||||||||
| Phoenix Terminal | Specifications: 6 x 3.5mm VCC (DC Input V+) VCC (DC Input V+) GND (DC Input V-) GND (RS232) RXD/A (The default protocol is RS485 A+) TXD/B (The default protocol is RS485 B-) | |||||||||||
| Hardware Watchdog | Embedded hardware watchdog, supports device operation self-checking technology, device operation fault self-repair | |||||||||||
| Power Input | Power Type DC 12V/1.5A | |||||||||||
| Power Range 9V ~ 28VDC | ||||||||||||
| Power Consumption 4.2W (Idle), Max 10W (Full) | ||||||||||||
| Dimensions | 200mm x 141mm x 28mm (Excluding Antennas) | |||||||||||
| Weight | 920g | |||||||||||
| Environment | Operating Temperature: -30°C to 70°C Storage Temperature: -40°C to 90°C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing | |||||||||||
Product - ComIn I3000 Industrial Grade 4G Wireless Router Specifications.pdf | 890.12KB | Download |