4G / 5G Industrial Router / Router Modules / Industrial Switch Source Manufacturer

English

中文

English

(1)(1)(1)(1)(1)

ComIn I2300

Industrial 4G Wireless Router

4G LTE

Dual Band WiFi

Double Watchdog

ComIn I2300 adopts stable industrial-grade 32-bit MIPS processor, which has enterprise-level data communication processing capabilities. It has 128MB of system memory built-in, and supports 2.4GHz and 5.8GHz wireless protocol for WiFi, providing a maximum speed of up to 1200Mbps.

4G Industrial Router

4G Network | Dual Band Wireless | Quick Installation and Use

4G Network

4G to WiFi, 4G to wired, suitable for industrial environment networking solutions

2.4G/5.8G Dual Band Concurrent

Supports 2.4GHz 802.11n wireless protocol and 5.8GHz 802.11ac, providing a total bandwidth of up to 1200Mbps with stronger compatibility and larger bandwidth

Hardware and Software Watchdogs

The automatic network restart technology system, in case of system crash or network disconnection, automatically sends an instruction to wake up the system, ensuring 24-hour stable operation

ComCloud Management

Effectively carry out remote management of multiple devices, timely grasp the operating status of devices, and know any device failures in a timely manner, troubleshoot and maintain them in a timely manner

Applicable to Multiple Scenarios

Widely used in the M2M industry in the IoT industry chain, such as smart grids, smart home finance, mobile POS terminals, supply chain automation, industrial automation, and other fields

(1)(1)(1)(1)(1)(1)(1)(1)(1)(1)(1)

Hardware Specifications
CPU	32bit MIPS Industrial Grade Processor
Memory	128MB (maximum support 256MB)
Flash	16MB SPI Flash (up to 64MB)
WiFi	2.4GHz 802.11n MIMO up to 300Mbps 5.8GHz 802.11ac MIMO up to 867Mbps
Interfaces	WAN	1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection
	LAN	4 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection
	Industrial Terminal	2.54 standard industrial terminal, supports serial ports (RS232 andRS485), DC power supply
	SIM	A standard drawer-style SIM card interface (2FF)supporting 1.8V/3V SIM/USIM cards, featuring built-in 1.5KVESD protection, and supporting built-in SIM cards
	Power Interface	Standard DC interface, built-in power reverse protection
	Reset	1 x pinhole reset button
	Antenna	6 x standard SMA antenna interfaces, characteristic impedance 50ohms
Indicators Light	PWR system status indicator x 1 SYS system status indicator x 1 WiFi indicator light x 1 NET status indicator x 1 CELL signal strength indicator x 3
Phoenix Terminal	Specifications: 7 x 2.54mm VCC+ (DC Input) GND (DC Input) GPIO1 (GPIO Input 0/3.3V) GPIO2 (GPIO Output 0/3.3V) GND (RS232) RXD/B- (The default protocol is RS485) TXD/A+ (The default protocol is RS485)
Hardware Watchdog	Embedded hardware watchdog, supports device operation self-checking technology, device operation fault self-repair
Power Input	Power Type DC 12V/1.5A
	Power Range 9V ~ 36VDC Wide Power Input
	Power Consumption <750mA (12V) average power consumption 500mA@12V
Dimensions	130mm135mm26mm (excluding antenna and installation parts)
Weight	480g (excluding packaging and accessories)
Environment	Operating Temperature: -35°C to 75°C Storage Temperature: -40°C to 85°C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing