4G / 5G Industrial Router / Router Modules / Industrial Switch Source Manufacturer

English

中文

English

(1)(1)(1)(1)

ComIn I2200

Industrial Grade 4G Wireless Router

4G LTE

300Mbps High-power WiFi

Multi Port Design

ComIn I2200 provides 5 x 100Mbps RJ45 network ports , a set of industrial phoenix terminals (serial port, GPIO, and DC power supply), and a drawer SIM/UIM card slot. It can have the serial port, Ethernet port and WIFI connected and working at the same time, providing pass-through data transmission and GPIO control functions.

Multi Port 4G Industrial Router

4G Network | High Performance Processor | Multi Port Design

4G Network

4G to WiFi, 4G to wired, suitable for industrial environment networking solutions

Hardware and Software Watchdogs

The automatic network restart technology system, in case of system crash or network disconnection, automatically sends an instruction to wake up the system, ensuring 24-hour stable operation

Industrial Grade Design

Industrial grade metal casing, suitable for various extreme environments, meets the requirements of fault free and reliable operation in vibration and impact environments

High Speed Internet Experience

4G speed of 150Mbps downstream and 50Mbps upstream; The maximum speed of WiFi can reach 300Mbps, and it is stable and not disconnected

Applicable to Multiple Scenarios

It is widely applied in various scenarios, such as massage chairs, intelligent surveillance, PLC remote control, smart public transportation, intelligent express delivery lockers, and more

(1)(1)(1)(1)(1)(1)(1)(1)(1)(1)

Hardware Specifications
CPU	32bit MIPS Industrial Grade Network Processor
System Memory	128MB DDR2 RAM (Optional 256MB Max)
Flash	16MB SPI Flash (Optional 32MB Max)
WiFi	2.4GHz IEEE 802.11n MIMO
Interfaces	WAN	1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection
	LAN	4 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection
	Terminal Block	2.54mm Standard Industrial Terminal Block. SupportSerial RS232/RS485, DC Power Input, GPIO
	SIM	1 x Drawer-Type SIM Card Holder(2FF)Support Standard 1.8V/3V UIM/SIM Card, 15KV ESDProtection, Support Built-in SIM Card (eSIM)
	Power	Standard DC Power Input Jack, Reverse-VoltageProtection and Surge Protection
	Reset	1 x Factory Reset Button
	Antenna	2 x Standard SMA-Female Antenna Connector, 50 ohm(Cellular) 2 x Standard RP-SMA-Male Antenna Connector, 50 ohm(WiFi)
Indicators	PWR LED Indicator x 1 SYS LED Indicator x 1 WiFi LED Indicator x 1 NET Status LED Indicator x 1 CELLULAR Strength LED Indicator x 3
Phoenix Terminal	Specifications: 7 x 2.54mm VCC+ (DC Input) GND (DC Input) GPIO1 (GPIO Input 0/3.3V) GPIO2 (GPIO Output 0/3.3V) GND (RS232) RXD/B- (The default protocol is RS485) TXD/A+ (The default protocol is RS485)
Hardware Watchdog	Built-in Hardware Watchdog, Auto Self-Check, Auto Failure Recovery
Power Input	Power Type 12VDC/1A
	Power Range 9V ~ 36VDC Wide Power Input
	Power Consumption <450mA (12V), Average 210mA@12V
Dimensions	130mm x 135mm x 26mm (Exclude Antenna and Mounting Sets)
Weight	Approx. 445g
Environment	Operating Temperature: -35°C to 75°C Storage Temperature: -40°C to 85°C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing