4G/5G Industrial Router/Router Modules/Industrial Switch Source Manufacturer

The ComIn I2100 also provides an Ethernet WAN RJ45 network port, an Ethernet LAN RJ45 network port, a set of industrial Phoenix terminal blocks (serial function and power supply function), a drawer type SIM/UIM card slot. ComIn I2100 can simultaneously connect serial ports, Ethernet ports, and WiFi for direct transmission.

Product Details

Technical Parameter

Data Download

Product Video

Industrial Grade 4G Wireless Router

Cloud service | High-performance Processor | Hardware Watchdog

4G Network

The 4G antenna can receive signals from operator networks and convert them into wired networks, or it can also convert them into Wi-Fi networks, with intelligent wired/4G switching

Hardware and Software Watchdogs

The automatic network restart technology system, in case of system crash or network disconnection, automatically sends an instruction to wake up the system, ensuring 24-hour stable operation

Wide Temperature and Wide Pressure Design

Industrial grade metal casing, suitable for various extreme environments, meets the requirements of fault free and reliable operation in vibration and impact environments

High Speed Internet Experience

4G speed of 150Mbps downstream and 50Mbps upstream; The maximum speed of WiFi can reach 300Mbps, and it is stable and not disconnected

Applicable to Multiple Scenarios

It is widely applied in various scenarios, such as massage chairs, intelligent surveillance, PLC remote control, smart public transportation, intelligent express delivery lockers, and more

(1)(1)(1)(1)(1)(1)(1)(1)(1)

Hardware Specifications
CPU	32-bit MIPS 24KEc Industrial Grade Chipset, Core Frequency 575/580MHz
System Memory	128MB / Optional 256MB DDR2 RAM
Flash	16MB SPI Flash (Optional 64MB Max)
Wi-Fi	2.4GHz IEEE 802.11n MIMO up to 300Mbps Detachable High Gain Wi-Fi Antennas
Interfaces	WAN	1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection
	LAN	1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection
	Terminal Block	2.54mm Standard Phoenix Style terminal Block Connector, Support RS232/RS485 Serial Connection. Include DC powerInput Pin DI, DO
	SIM	1 x Standard Drawer-type SIM Card Holder (2FF)Support 1.8V/3V SIM/UIM card, Built-in 15KV ESDProtection Support Built-in SIM Card(Option)
	Power	Standard DC Power Input Jack, Reverse-VoltageProtection and Surge Protection
	Reset	1 x PinHole Reset Button
	WPS	1 x WPS Button
	Antenna	2 x Standard SMA-Female Antenna Connector, 50 ohm(Cellular) 2 x Standard RP-SMA-Male Antenna Connector, 50 ohm(WiFi)
Indicators	PWR LED Indicator x 1 SYS LED Indicator x 1 Wi-Fi LED Indicator x 1 WAN LED Indicator x 1 LAN LED Indicator x 1 VPN LED Indicator x 1 NET LED Indicator x 1 SIM Card Status LED Indicator x 1 Cellular Signal Strength LED Indicator x 3
Phoenix Terminal	Specifications: 7 x 2.54mm V+ (DC Input) V- (DC Input) DI (default 12V high-level ) DO (0/5V~24V) GND (RS232) TXD/A+ (The default protocol is RS485) RXD/B- (The default protocol is RS485)
Hardware Watchdog	Included Hardware Watchdog, Support Device Operation Self-CheckTechnology, Auto Recovery from Device Failure
Power Input	Power Type 12VDC/1A
	Power Range 9V ~ 36VDC Wide Power Input
	Power Consumption <450mA (12V), Average 170mA@12V
Dimensions	95mm x 106mm x 28mm (Excluding Antenna and Mounting Sets)
Weight	Approx. 280g (Excluding Antenna and Mounting Sets)
Environment	Operating Temperature: -35°C to 75°C Storage Temperature: -40°C to 85°C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing