4G / 5G Industrial Router / Router Modules / Industrial Switch Source Manufacturer

English

中文

English

(1)

ComIn I210

Ultra Small Size 4G Industrial Router

Support 4G Cat1 or 4G Cat4

Wide Voltage Input Design

Cost-effective

ComIn I210 provides single 10/100Mbps RJ45 LAN network port, a set of industrial phoenix terminals (serial pot RS232 or RS485), and a drawer SIM/UIM card slot. It can have the serial port, Ethernet port, and WiFi connected and working at the same time, providing pass-through data transmission.

Ultra Small Size 4G Industrial Router

Fully Functional | Flexible Deployment | High Cost-effectiveness

Support 4G Cat4 (Optional Cat1)

Plug in and use, breaking network restrictions and providing stable and high-speed data channels for industrial interconnection

Smart Chip Stable Network

Equipped with a high-performance chip, it can better adapt to the current mainstream signal modules, ensuring stable wireless signals without going offline

High-speed Internet Access Experience

2.4GHz 802.11n MIMO up to 150Mbps, Maximum support of 300Mbps (optional), stable access for multiple terminals

Industrial-grade Design

Industrial-grade metal casing, suitable for various extreme environments, ensuring reliable and fault-free operation under vibration and shock conditions

ComCloud Management

No need to travel, you can open the router management backend anytime, anywhere

Applicable to Multiple Scenarios

Suitable for various small-scale industrial application scenarios, such as robotic dogs, intelligent monitoring, PLC remote control, etc

Case 1: Application of 4G DTU

I210 is suitable for both wired and wireless communication, enabling serial device networking and remote control, stable and reliable

Case 2: Video Surveillance

Through 4G high-speed networking, it supports big data transmission from cameras and other devices, empowering remote monitoring

Customized Service

Tailored communication networking devices for you, deeply adapted to complex application scenarios, creating super stability and reliability

Installation Method

(1)(1)(1)(1)(1)(1)(1)

Hardware Specifications
CPU	32bit MIPS Dual Core Industrial Grade Processor
System Memory	64MB
Flash	16MB SPI Flash (optional Max 32MB)
Cellular	4G Cat4 or optional 4G Cat1 model
WiFi	2.4GHz IEEE 802.11n MIMO 150Mbps Max.
Interfaces	RJ45	1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KVMagnetic Isolation Protection (Default LAN, can beconfigured as WAN Port)
	Terminal Block	2.54mm Standard Industrial Terminal Block. Support SerialRS232/RS485, DC Power Input
	SIM	1 x Drawer-Type SIM Card Holder(2FF)Support Standard 1.8V/3V UIM/SIM Card, 15KV ESDProtection Support Built-in SIM Card (option)
	Power	Standard DC Power Input Jack, Reverse-VoltageProtection, and Surge Protection
	Reset	1 x Factory Reset Button (Pinhole)
	Antenna	2 x Standard SMA / RP-SMA Antenna Port, 50-ohm
Indicators	PWR LED Indicator x 1 WLAN LED Indicator x 1 NET Status LED Indicator x 1 CELLULAR Strength LED Indicator x 3
Phoenix Terminal	Specifications: 5 x 2.54mm V+ (DC Input) V- (DC Input) GND (RS232) TXD/485A (The default protocol is RS485 A+) RXD/485B (The default protocol is RS485 B-)
Power Input	Power Type 12VDC/1A
	Power Range 9V ~ 36VDC
	Power Consumption <450mA (12V), Typical 170mA @ 12V
Dimensions	100mm x 63mm x 31mm (Exclude Antenna and Mounting Sets)
Weight	Approx. 180g (Excluding Antenna and Accessories)
Environment	Operating Temperature: -35°C to 75°C Storage Temperature: -40°C to 85°C Operating Humidity: 10% to 95% RH Non-condensing Storage Humidity: 5% to 95% RH Non-condensing