|
|
ComIn I2200 provides 5 x 100Mbps RJ45 network ports (one of which can be multiplexed with WAN/LAN, four LAN ports), a set of industrial phoenix terminals (serial port, GPIO, and DC power supply), and a drawer SIM/UIM card slot. It can have the serial port, Ethernet port and WIFI connected and working at the same time, providing pass-through data transmission and GPIO control functions.
Introduction Applications Specifications Download |
Model | I2200 | |||||
CPU | 32bit MIPS Dual Core Industrial Grade Network Processor | |||||
System Memory | 128MB DDR2 RAM (Optional 256MB Max) | |||||
Flash | 16MB SPI Flash (Optional 32MB Max) | |||||
| Wi-Fi | 2.4GHz IEEE 802.11n MIMO | |||||
Interfaces | WAN | 1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KV Magnetic Isolation Protection | ||||
LAN | 4 x 10/100Mbps FE RJ45 Port, auto MDI/X, with 1.5KV magnetic isolation protection | |||||
Terminal Block | 2.54mm Standard Industrial Terminal Block. Support Serial RS232/RS485, DC Power Input, GPIO | |||||
SIM | 1 x Drawer-Type SIM Card Holder, Support Standard 1.8V/3V USIM/SIM Card, 15KV ESD Protection, Support Hot-Swap, Support Built-in SIM Card (eSIM) | |||||
Power | Standard DC Power Input Jack, reverse-voltage protection and surge protection | |||||
Reset | 1 x Reset Button | |||||
WPS | 1 x WPS Button | |||||
Antenna | 2 x Standard SMA / RP-SMA Antenna Port, 50 ohm | |||||
Indicators | PWR LED Indicator x 1 | |||||
SYS LED Indicator x 1 | ||||||
WIFI LED Indicator x 1 | ||||||
NET Status LED Indicator x 1 | ||||||
CELLULAR Strength LED Indicator x 3 | ||||||
| Network Port LED Indicator x 5 | ||||||
Power Input | Per Typowe | 12VDC/1A | ||||
Power Range | 6~36VDC Wide Power Input | |||||
Power Consumption | <450mA (12V), Average 210mA@12V | |||||
Watchdog | Built-in Hardware Watchdog, Auto Self-Check, Auto Failure Recovery | |||||
EMC | Electrostatic: EN61000-4-2, Level4 | |||||
Radiated Electric Field: EN61000-4-3, Level4 | ||||||
Pulsed Electric Field: EN61000-4-4, Level4 | ||||||
Surge: EN61000-4-5, Level3 | ||||||
Conducted Disturbance: EN61000-4-6, Level4 | ||||||
Power Frequency Interference: EN61000-4-8, Horizontal/Vertical 400A/m (>Level 4) | ||||||
| Shock Wave Immunity: EN61000-4-12, Level4 | ||||||
Enclosure | Metal Casing, Safe Isolation Between Casing and System, Especially Suitable For Industrial Control Field Applications | |||||
Dimensions | 130mm x 135mm x 26mm (Exclude Antenna and Mounting Sets) | |||||
Weight | Approx. 445g | |||||
Environment | Operating Temperature: -35°C to 75°C | |||||
Storage Temperature: -40°C to 85°C | ||||||
Operating Humidity: 10% to 95% RH Non-condensing | ||||||
Storage Humidity: 5% to 95% RH Non-condensing | ||||||
| Firmware | Linux SDK | |||||
Product - ComIn I2200 Industrial Grade 4G Wireless Router Product Specifications V1.0.pdf | 664.58KB | Download |