|
|
ComFi WL280 is an outdoor 2x2 2.4GHz 802.11n wireless CPE, suitable for outdoor areas that require wireless coverage and bridging over a long distance. ComFi WL280 has a 8dBi flat panel directional antenna to have radio reach out to 1.5KM distance for point to point or point to multipoint connectivity. It support MIMO and the maximum concurrent connection rate of 2.4GHz Wi-Fi band can as high as 300Mbps. It supports up to 50+ connection points to make up a wide wireless network in one area. It is proven to deliver a stable and reliable wireless network for users.
ComFi WL280 supports Passive PoE power supply and pole installation. The installation and configuration are flexible and convenient with visual digital information display. Users only need to spend a short time to complete the settings for point to point or point to multipoint long distance access point deployment.information display. Users only need to spend a short time to complete the settings for point to point or point to multipoint long distance access point deployment.
Introduction Application Specifications Download |
Model | WL280 | |||||
CPU | MT7628DAN | |||||
FLASH | 8MB | |||||
DDR2 | 64MB | |||||
2.4GHz Frequency | 2.412GHz ~ 2.484GHz | |||||
2.4GHz Standard | 802.11b/g/n | |||||
SSID Hide | Support | |||||
Data Rate | 300Mbps | |||||
Support Modes | Repeater Mode, AP Mode | |||||
Management | AC Controller Remote Management Support (FIT AP mode) | |||||
Coverage Distance | 1500 Meter, Line of Sight (LOS) | |||||
Max Users | 50+ | |||||
2.4GHz RF Power | 802.11b | 11M | 18±2dBm | 1M | 21±2dBm | |
802.11g | 54M | 17±2dBm | 6M | 20±2dBm | ||
802.11n HT20 | MCS7 | 16±2dBm | MCS0 | 19±2dBm | ||
802.11n HT40 | MCS7 | 15±2dBm | MCS0 | 18±2dBm | ||
2.4GHz Reception Sensitivity | 802.11b | 11M | -85dBm | 1M | -94dBm | |
802.11g | 54M | -72dBm | 6M | -88dBm | ||
802.11n HT20 | MCS7 | -68dBm | MCS0 | -86dBm | ||
802.11n HT40 | MCS7 | -66dBm | MCS0 | -85dBm | ||
2.4GHz EVM | 802.11b: ≤-10dB 802.11g: ≤-25dB 802.11n: ≤-28dB | |||||
PPM | ±20ppm | |||||
WAN | 1 x 10/100Mbps WAN Port Auto MDI/X, Support Passive PoE 24V | |||||
LAN | 1 x 10/100Mbps LAN Port Auto MDI/X | |||||
PoE | 24V 0.5A Power over Ethernet | |||||
Reset | Reset Button (Long Press 10 Second to Activate Default Factory Settings) | |||||
LED Display | 2 Digital LED Display with Function Button and Select Button | |||||
Switch | Bridge Mode DIP Switch (Left-Slave, Right-Master) | |||||
LED Indicators | SYS, WIFI, LAN, WAN | |||||
2.4GHz Antenna | 8dBi Flat Panel Directional Antenna | |||||
Power Consumption | < 5W | |||||
Size | 168 x 88 x 47.6MM (L x W x H) | |||||
Enclosure | ABS material IP65 Dust Proof and Water Proof | |||||
| ESD | Contact Discharge ±6KV, Air Discharge ±8KV | |||||
Surge Protection | Standard: Common Mode: ±2KV, Differential: ±1KV (Optional: Common Mode: ±4KV, Differential: ±2KV) | |||||
Working Environment | Working Temperature: -30°C to 55°C Max Working Temperature: -40°C to 70°C Storage Temperature: -40°C to 70°C Humidity: 5% ~ 95% ( Non condensing) | |||||
Features | WIFI Analyzer | |||||
Digital Indicator (Master/Slave, Channel, Signal Strength Info) | ||||||
Port Interface Surge Protection | ||||||
Product - ComFi WL280 Outdoor 1.5KM 2.4GHz Wireless CPE Product Specifications V1.0.pdf | 396.66KB | Download |