|
|
Introduction Application Specifications Download |
Model | ComIn I2000 | |||||
CPU | 32bit MIPS Industrial Network Processor | |||||
System Memory | 128MB DDR2 RAM | |||||
Flash | 16MB SPI Flash | |||||
| Wi-Fi | 2.4GHz IEEE 802.11n MIMO | |||||
Interfaces | WAN | 1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KV Magnetic Isolation Protection | ||||
LAN / RS232 | 1 x 10/100Mbps FE RJ45 Port, Auto MDI/X, with 1.5KV Magnetic Isolation Protection (Default) | |||||
| 1 x Serial RS232/RS485 RJ45 Port (Alternative) | ||||||
SIM | Standard DC Power Input Jack, Reverse-Voltage Protection and Surge Protection | |||||
Power | 1 x Factory Reset Button | |||||
Reset | 1 x Factory Reset Button | |||||
Antenna | 1 x WIFI and 1 x Cellular | |||||
Standard SMA / RP-SMA Antenna Port, 50 ohm | ||||||
Indicators | PWR LED Indicator x 1 | |||||
SYS LED Indicator x 1 | ||||||
WAN LED Indicator x 1 | ||||||
LAN LED Indicator x 1 | ||||||
WIFI LED Indicator x 1 | ||||||
CELLULAR Connection LED Indicator x 1 | ||||||
Power Input | Power Type | 12VDC/1A | ||||
Power Range | 6V ~ 40VDC | |||||
Power Consumption | <450mA (12V) | |||||
Watchdog | Built-in Hardware Watchdog, Auto Failure Recovery | |||||
Enclosure | Metal Casing, IP30 Rating protection | |||||
Dimensions | 98mm x 95mm x 25mm (Exclude Antenna and Mounting Sets) | |||||
Weight | 324g | |||||
Environment | Operating Temperature: -20°C to 70°C | |||||
Storage Temperature: -40°C to 85°C | ||||||
Operating Humidity: 10% to 95% RH Non-condensing | ||||||
Storage Humidity: 5% to 95% RH Non-condensing | ||||||
| Firmware | Factory OpenWRT or Linux SDK | |||||
Product - ComIn I2000 Industrial Grade 4G Wireless Router Product Specifications V1.4.pdf | 773.72KB | Download |