|
|
Designed based on a single-chip IPQ6000, the module is a quad-core ARM Cortex-A7 architecture with a main frequency of up to 710MHz. WiFi supports dual-band 802.11a/b/g/n/ac/ax 2x2 MIMO with a maximum bandwidth of up to 1800Mbps. The module supports both AP and client modes, including a large number of business applications that reduce customer research and design effort.
Introduction Application Specifications Download |
Model | IoT60 | ||||
Main Chipset | IPQ6000 | ||||
RF Frequency | 2.40~2.4835GHz & 5.725~5.850GHz | ||||
WiFi Standards | 802.11a/b/g/n/ac/ax(2X2) | ||||
Modulation | 11b: DBPSK, DQPSK and CCK and DSSS 11g: BPSK, QPSK, 16QAM, 64QAM and OFDM 11n: MCS0~15 OFDM 11a:BPSK, QPSK, 16QAM, 64QAM 11ac:BPSK, QPSK, 16QAM, 64QAM, 256QAM,OFDM 11ax:BPSK, QPSK, 16QAM, 64QAM, 256QAM,1024QAM,OFDMA | ||||
Theoretical Bandwidth | 11b:1, 2, 5.5 and 11Mbps 11g:6, 9, 12, 18, 24, 36, 48 and 54 Mbps 11n: MCS0~5,MIMO up to 300Mbps 11a:6, 9, 12, 18, 24, 36, 48 and 54 Mbps 11ac:wave2,MU-MIMO,up to 867Mbps 11ax:2.4Ghz up to 600Mbps,5.8GHz up to 1200Mbps | ||||
Board to Board Connector | 100Pin Connector | ||||
Main Interfaces | Ethernet*5, UART*1, USB*1，PCIE*1 | ||||
PCB | 4 Layer | ||||
Size | 86.5mm(W) x 66.5mm(L) x 8.0mm(T) | ||||
Antenna | Standard IPEX Connector | ||||
Operating Temperature | -20°C to +70°C | ||||
Storage Temperature | -40°C to +90°C | ||||
Humidity | 5% ~ 95% | ||||
Static Protection | Human Body Model: -2000V ~ +2000V | ||||
Static Protection | Machine Mode: -200V ~ +200V | ||||
Operating Voltage | 12V +/-10% | ||||
Average Power Consumption | 4.5W | ||||
Cooling Size (Recommend) | 80 x 56 x 6 Note: the wifi6 chip operates and has high thermal temperature, the module temperature needed to be in control below ≤70℃ | ||||
GPIO Output Voltage | 1.8 V & 3.3V +/-10% | ||||
Product - ComIoT 60 Module Product Specifications V1.1.pdf | 1.59MB | Download |
to the end ~